Rotatable Probe Filler Port Dust Cover
The Rotatable Probe Filler Port Dust Cover is an essential component. It is fitted to the BRK Brocock Compatto, Concept XR and Ranger XR models. The cover sleeves the end of the main air cylinder and rotates so that the filler port.
Use
For use on BRK Brocock models that use a push-in probe for charging.
Start by rotating the cover so that the notch aligns with the filler port aperture. This will let you push in your filler probe so that you can then recharge the rifle with air.
After use, pull out the filler probe. Then simply rotate the dust cover so that the filler port is no longer exposed. This protects the the main charging inlet valve (filler port) from dirt ingress.
Important maintenance
Keeping your PCP rifle’s filler port free from dirt and grit is essential for maintaining its performance. Dirty valves will affect the seal and can cause any PCP to leak. If the Rotatable Filler Port Cover of your BRK Brocock Compatto, Concept XR or Ranger XR sustains damage, you should replace it!
Fitting
This replacement component is easy to fit. Simply pull off the old unit, and push on the new one. Tip: Add a little grease around the O-rings so that the cover can rotate smoothly.
Important: Before you work on your rifle, always ensure the rifle is uncocked, unloaded and the safety applied.
