New Quantum Hi-Capacity Magazine
Increases payload of BRK Ghost, XR and XR2 models
BRK Brocock’s new Quantum Hi-Capacity Magazine extends both the fast-fire and payload capability of certain BRK Brocock PCP air rifle models.
Innovative Design
An official factory Performance Center upgrade, the Quantum features a number of innovative design features. It’s 3D Printed from computer-generated, digital design using state-of-the-art additive manufacturing processes now widely incorporated into many world-leading industries, such as in aerospace and Formula 1 motorsport. It is therefore a natural choice for BRK Brocock’s class-leading airguns.
Unlike most magazines, which are chain- or belt-driven, the new BRK Brocock Quantum Hi-Capacity Magazine uses a localised, two-gear drive system with a cam-guided motion. As its primary gear rotates, it automatically engages the secondary gear, ensuring a perfectly synchronized feed of ammo.
Additionally, the new Quantum introduces the ‘Link 8’ concept – a horizontal figure-of-eight carrier system. Individual carrier pairs interact dynamically depending on their position within the magazine’s cycle, ensuring jam-free operation and perfect alignment when finally presented to the breech / bore of the rifle. This results in no loss of accuracy compared to single-shot feed.
Compatibility
The Quantum is suitable for both pellets and slugs. Specific-fit versions are available for the following BRK Brocock models:
- BRK Ghost PCP
- XR / XR2 Series PCPs
Daystate versions of the Quantum are also available for the Alpha Wolf, Delta Wolf and Blackwolf PCP air rifles, here. Note: The Quantum can be loaded into the receiver from either the right- or left-hand side on the Alpha and Delta Wolf models. However, it is left-hand fit only for the Blackwolf.
Caliber and Capacity
The Quantum is available in four calibers for BRK models, with payloads as follows:
- .177″ / 4.5mm – 30-shot
- .22″ / 5.5mm – 28-shot
- .25″ / 6.35mm – 24-shot
- .30″ / 7.62mm – 22-shot
Operation and Maintenance
The Quantum Hi-Capacity Magazine features a gate-loading face to facilitate pellet / slug insertion. It is straightforward to use and comes with a comprehensive Operating Guide. It also requires minimal maintenance, other than occasional treatment with a dry, PTFE-based spray lubricant.
